11kW/22kW/43kW Wall Mounted DC Charger
SETEC Power 11kW, 22kW, 43kW AC wall-mounted charging solution for home use.
With a decade of experience in innovating, installing, and maintaining the e-mobility infrastructure, provide mature mobility solutions from the highway to home.
Strong as SETEC Power, provides the 11kw/22kw/43kw wall-mounted charger, spanning the AC and DC charger market offering tailored, intelligent, and connected charging solutions for any location type and business.
FEATURES
- Suitable for charging vehicles with connectors
- Supply Circuit- Single Phase or 3 Phase Power
- Install Indoor
- Wall mounted for convenience
- Plug & Play, RFID Card
- Function, OCPP optional
- Overload integrated Protection
- Color LEDs indicate operating status, Color Housing for Choice including Yellow, Blue, or Customized color
Description
Specially designed for Wall mounted installation.
Wall Mounted dual type 2 socket with single phase or three phase output per socket providing up to 22kW charging rates. Suitable for all electric vehicles. These intelligent units are managed remotely over Ethernet access to the internet or OCPP service to operate. Ideal for commercial locations, such as car parks, retail and business parks, hotels and fleet depots.
SETEC Power DC Type 2 charging Station provides DC power to EVs On Board Charger, which used the advanced embedded control technology, With a variety of billing methods and intelligent charging management to meet the latest requests and demand, through RFID Card or OCPP for communication. They have Over-current protection, short circuit protection, emergency stop and other functions. They are in Friendly interface, easy to use, environmental applicability, stable and reliable chargers.
Technical specifications
FUNCTIONS | Charging progress | LCD |
---|---|---|
Authentication/User activation | RFID system ISO/IEC14443A/B, ISO/IEC15693 |
|
Communication with CSCC (Charging Station Control Center) | interface OCPP | |
Communication with vehicle | PLC modem (Power-Line-Communication) needed for Plug Charge; control signal acc-with IEC 61851-1; IEC 61851-22;IEC 69/9 | |
Safety mechanism | Remote-controlled system for locking and / or disconnecting the power supply at the connector cable | |
Min.OCPP protocol | v1.5 or v1.6 | |
INPUT | Voltage range | 300V-520V |
Frequency | 50 Hz±20% | |
Max.current&power | 3 x 32 A, 2 x 22 kW | |
OUTPUT | DC output power | 11kW/22kW/43kW |
DC output current | - | |
DC connector (min.1 pc) | Mode-3 Type 2 | |
GENERAL | Protection | Short circuit protection and connection, overcurrent protection (OCP), temperature protection (OTP), overload protection, RCD, relay test |
Minimum degree of protection (Internal / external) |
IP 54 | |
Minimum impact protection | IK 10 | |
Minimum working temperature range | -20ºC to +45ºC |